Search

BLDC Motor Commutator/Controller
(20 Pins)

LS7260C-S, LS7260C-TS, LS7260C, LS7262C-S, LS7262C-TS, LS7262C

Category: Brushless DC Motor Controls

Status: In Production

Stock Availability: DIP, SOIC, TSSOP

All of our Standard Products are RoHS Compliant

For pricing and availability, you may contact us, or request a quote. Most of our standard parts are available for purchase on Digi-Key, and through our Distributors.

Features:

• Direct drive of P-Channel and N-Channel FETs (LS7260C)
• Direct drive of PNP and NPN transistors (LS7262C)
• Six outputs for driving power switching bridge directly
• Open or closed loop motor control
• +5C to +28C operation (VSS – VDD)
• Externally selectable input to output code for 60°, 120°, 240°, or 300° electrical sensor spacing
• Three or four phase operation
• Analog speed control
• Direction control
• Output enable control
• Positive static braking
• Over-current sensing

Description:

The LS7260C / LS7262C are MOS integrated circuits designed to generate the signals necessary to control a three phase or four phase brushless DC motor. They are basic building blocks of a brushless DC motor controller. The circuit responds to changes at the SENSE inputs originating at the motor position sensors to provide electronic commutation of the motor windings. Pulse width modulation of outputs for motor speed control is accomplished through either the ENABLE input or through the Analog input (VTRIP) in conjunction with the OSCILLATOR input. Over-current circuitry is provided to protect the windings, associated drivers, and power supply. The over-current circuitry causes the external output drivers to switch off immediately upon sensing the over-current condition and on again only when the over-current condition disappears and the positive edge of either the ENABLE input or the saw-tooth OSCILLATOR occurs. This limits the over-current sense cycling to the chopping rate of the ENABLE input or the saw-tooth OSCILLATOR.

A positive braking feature is provided to effect rapid deceleration. While the LS7262C is designed for driving PNP and NPN transistors, the LS7260C is designed to drive both PMOS and NMOS Power FETs and develops a full 12V drive for both the N-Channel and P-Channel devices when using a 12V power supply.
Code
Package
Notes

P/N

RoHS Compliant Standard plastic DIP

1, 2, 3

P/N – S

RoHS Compliant Standard SOIC

1, 2, 3, 4

P/N – SW

RoHS Compliant Widebody SOIC option

1, 2, 3, 4

P/N – S14

RoHS Compliant 14-pin SOIC version of 8-pin part

1, 2, 3, 4

P/N – TS

RoHS Compliant TSSOP

1, 2, 3, 4

P/N – TS24

RoHS Compliant 24-pin TSSOP version of 20-pin part

1, 2, 3, 4

Example: LSxxxx-TS = the LSxxxx in the RoHS Compliant TSSOP package-type

Note 1: See Table for package body widths

Note 2: Package outline drawings conform to JEDEC standards

Note 3: Packages shipped in anti-static tubes

Note 4: Tape and Reel option available. Contact factory for details

ADDITIONAL ORDERING OPTIONS:

Probed Wafers (P/N-PW), Waffle Packed Die (P/N-WP)

Package Body Widths
# of Pins
P/N, -C, -CM
mils
-S
mils
-SW
mils
-TS
mils

8

300

150

14

300

150

173

16

300

150

300

173

18

300

300

20

300

300

173

24

600

300

173

28

600

300

173

38

173

40

600

48

240